Glo-Protek Marine Aluminium Coating M-126
Glo-Protek Marine Aluminium Coating M-126 is a superior quality single pack High Built alkyd based Aluminium coating recommended for use in cargo holds, engine casing, structural steel (where the temp. does not exceed 90-100ºC) guard rails etc.
Technical Data
| Colour | Aluminum |
|---|---|
| Finish | Lustrous Aluminium |
| Flash Point | > 30ºC |
| Volume Solids | 45% ±2 |
| Recommended DFT | 50 – 60µ |
| Theoretical Covering | 14M² per ltr. at 30µ |
| With 30% Loss | 9.8 M² per ltr. |
| Mode of Application | Brush / Roller /Airless/Con. Spray. |
| Airless Spray | Tip size : 0.015-0.021 Fluid Pressure : 2000-2500 psi. |
| Thinner Recommended | Glo-Protek G. P. Thinner. |
| Drying Time | Surface Dry : 1 hour maximum Hard Dry : Overnight |
| Overcoating Interval | 24 hours Minimum, No Maximum |
| Subject to Use | 48 hours minimum |
Surface Preparation
Surface should be free from all contaminants dry and suitably epoxy primed.
Shelf Life
12 months
Packing
20 litres