Glo-Protect Epoxy MIO 505 HB
Glo-Protek Epoxy MIO 505 HB Paint is Two-component, High Build intermediate composition containing Micaceous Iron Oxide (MIO) pigment. Recommended as an intermediate coat in protective coating system.
Typical Use
As an excellent inter-coat, where high degree of resistance is required to water, mild chemicals, sultry condition, abrasion and moisture etc. Typically used as a intermediate protective coating. It imparts a high degree of resistance to moisture, water & chemicals in saline condition.
PRODUCT Data
| Mixing Ratio | 5:1 by volume |
|---|---|
| Pot Life | 2-4 hrs (30º C) |
| Application | Airless Spray, Air Spray, Brush |
| Nozzle Orifice | 0.017” – 0.019” |
| Volume Solids | Approx. 65% |
| Recommended DFT/COAT | 50-125 Microns |
| Theoritical Spreading Rate | |
| At Above DFT | 13.200-5.28 M2 /Ltr at above DFT |
| Surface Dry | 1-2 hours at 30º C |
| Hard Dry | 24 Hrs. |
| Fully Cured | 7 days at 30º C |
| Over Coating Interval | Min: 24 Hrs. |
| Colour | Red-Brown |
| Finish | Matt-Egg Shell |
| Thinner | Epoxy Thinner |
Surface Preparation
A base coat of GPRC is required.
As a general rule, avoid inhalation of solvent vapor or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent-borne coating in confined spaces or stagnant air. Skin and eye protection follow the local and national regulations.